Leather Repair Tutorial

Leather Repair Tutorial

Today, I will teach you a leather repair tutorial to solve the small problems you encounter in life.

The repair method of completely broken is first clean with leather cleaner and let it dry by itself or air-dried with a hair dryer. Take a piece of leather or non-woven fabric that is consistent with the softness of the leather in the hole, paste it on the bottom of the hole with ordinary glue (such as glue such as universal glue), and then fill the hole with repair cream; fill the hole with it. Fill it up two or three times, and let it dry for about half an hour each time. After filling it, make the lines on the surface the same as the above method.

The method of repairing damage without peeling is first to clean it with leather cleaner, let it dry by itself or air-dry with a blower, take a piece of leather or non-woven fabric that is consistent with the softness of the damaged leather, and stick it on the bottom of the damage with ordinary glue, and then use it. Repair cream fills the damage; it only needs one time to fill up the damage, and there is no need to make lines.

The method of repairing cigarette butts is first to use a knife to remove the surrounding hard blocks, and then use a leather cleaner to clean it, let it dry or air-dried with a blower, and take a piece of leather or non-woven fabric that is consistent with the softness of the ironed leather , Use ordinary glue (such as universal glue) to paste on the bottom of the iron, and then fill it with repair cream; fill it with two or three times, and let it dry for half an hour each time Left and right, after filling up, the pattern on the top is the same as the above method.

If the patent leather product is damaged, you need to carefully smooth the damaged area with very fine sandpaper.

In order to eliminate the coarser particles on the sandpaper (to avoid deep scratches when sanding), the sandpaper should be repeatedly stretched and sanded on other hard objects (such as angle steel/iron rods, etc.).

After the damaged part of the patent leather is smoothed, spray the solvent-based material on the polished part first, and after it is dry, spray the entire surface of the patent leather product with a spray gun.

If the effect is not satisfactory, you can repeat the above operation to restore the damaged patent leather product to its original state.